If you want to change the rule, links for instructions are available on the libusb FAQ. Dolphin should now detect it in the controller settings (refer to #Dolphin Setup below). Reload udev rules with: sudo udevadm control -reload-rules Paste the following in the /etc/udev/rules.d/les file (/lib/udev/rules.d/les if making a package): However, a udev rule must be created to allow access to the device. Linux support does not require any special drivers, as long as Dolphin was built with libusb support. Official Nintendo adapters don't have a switch. If your adapter has such a switch, you have to set it to Wii U mode before following these instructions. Adapters by Nintendo and Mayflash are known to work.Ĭompatible third-party adapters generally have a switch for choosing between PC mode and Wii U mode. for Wii U, but certain third-party adapters don't seem to work with this method. This method of connecting controllers is intended to work with all adapters that are compatible with Super Smash Bros. Wireless controllers and bongos are supported. With Dolphin's implementation, the GameCube controller is auto-configured and calibrated, with full rumble support. Official GameCube Controller Adapter for Wii UĪs of 4.0-4599, Dolphin has built in support for the Nintendo GameCube controller Adapter for Wii U, the only official USB GameCube adapter available.
